• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    5.2670

    Wedge Clamps for Flat or Tapered Clamping Edge

    electro-mechanical, max. operating force 240 kN
    self-locking, with position monitoring
    Wedge Clamps for Flat or Tapered Clamping Edge
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Available on demand.
    Information Series
    Description
    Wedge clamps 5.2670

    Description 

    The clamping bolt of the wedge clamping elements is operated by a 24 VDC direct current drive via a snail transmission and a spindle stroke transmission.
    The self-locking spindle lifting gear stops the actuator in case of power failure and maintains it safely in the reached position. During clamping, the clamping bolt is moved with low inclination onto the straight clamping edge. The clamping bolt is completely retracted in the guide housing in off-position.
    The wedge clamp is equipped with an integrated position monitoring. In addition, fault messages can be output. The wedge clamping element is controlled via a control module equipped with different data interfaces.

    Video
    Products (55)
    clamping stroke [mm]
    total stroke [mm]
    type
    wedge clamp, electromechanical (48)
    type
    position monitoring
    with (48)
    max clamping force [kN]
    self-locking
    yes (48)
    bevel gear
    cable exit
    motor voltage [VDC]
    24 (48)
    permissible operating force [kN]
    fixing screw
    Item no. CAD datatypetypeposition monitoringmax clamping force [kN]
    Item no.
    826740201B
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    20
    Properties
    Item no.
    826740201C
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    20
    Properties
    Item no.
    826740201D
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    20
    Properties
    Item no.
    826740202A
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for sloping clamping edge
    position monitoring
    with
    max clamping force [kN]
    12.5
    Properties
    Item no.
    826740202B
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for sloping clamping edge
    position monitoring
    with
    max clamping force [kN]
    12.5
    Properties
    Item no.
    826740202C
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for sloping clamping edge
    position monitoring
    with
    max clamping force [kN]
    12.5
    Properties
    Item no.
    826740202D
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for sloping clamping edge
    position monitoring
    with
    max clamping force [kN]
    12.5
    Properties
    Item no.
    826750101
    CAD data
    /
    Item no.
    826750101A
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    35
    Properties
    Item no.
    826750101B
    CAD data
    /
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    35
    Properties
    Item no.
    826740201B
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    20
    clamping stroke [mm]
    16
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    with
    cable exit
    at the bottom
    motor voltage [VDC]
    24
    permissible operating force [kN]
    90 (for screws 10.9)
    fixing screw
    M16
    Item no.
    826740201C
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    20
    clamping stroke [mm]
    16
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    with
    cable exit
    ccw
    motor voltage [VDC]
    24
    permissible operating force [kN]
    90 (for screws 10.9)
    fixing screw
    M16
    Item no.
    826740201D
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    20
    clamping stroke [mm]
    16
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    with
    cable exit
    at the top
    motor voltage [VDC]
    24
    permissible operating force [kN]
    90 (for screws 10.9)
    fixing screw
    M16
    Item no.
    826740202A
    type
    wedge clamp, electromechanical
    type
    for sloping clamping edge
    position monitoring
    with
    max clamping force [kN]
    12.5
    clamping stroke [mm]
    18-22
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    with
    cable exit
    cw
    motor voltage [VDC]
    24
    permissible operating force [kN]
    30 (for screws 8.8)
    fixing screw
    M16
    Item no.
    826740202B
    type
    wedge clamp, electromechanical
    type
    for sloping clamping edge
    position monitoring
    with
    max clamping force [kN]
    12.5
    clamping stroke [mm]
    18-22
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    with
    cable exit
    at the bottom
    motor voltage [VDC]
    24
    permissible operating force [kN]
    30 (for screws 8.8)
    fixing screw
    M16
    Item no.
    826740202C
    type
    wedge clamp, electromechanical
    type
    for sloping clamping edge
    position monitoring
    with
    max clamping force [kN]
    12.5
    clamping stroke [mm]
    18-22
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    with
    cable exit
    ccw
    motor voltage [VDC]
    24
    permissible operating force [kN]
    30 (for screws 8.8)
    fixing screw
    M16
    Item no.
    826740202D
    type
    wedge clamp, electromechanical
    type
    for sloping clamping edge
    position monitoring
    with
    max clamping force [kN]
    12.5
    clamping stroke [mm]
    18-22
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    with
    cable exit
    at the top
    motor voltage [VDC]
    24
    permissible operating force [kN]
    30 (for screws 8.8)
    fixing screw
    M16
    Item no.
    826750101
    Item no.
    826750101A
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    35
    clamping stroke [mm]
    17
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    without
    cable exit
    cw
    motor voltage [VDC]
    24
    permissible operating force [kN]
    160 (for screws 10.9)
    fixing screw
    M20
    Item no.
    826750101B
    type
    wedge clamp, electromechanical
    type
    for straight clamping edge
    position monitoring
    with
    max clamping force [kN]
    35
    clamping stroke [mm]
    17
    total stroke [mm]
    25
    self-locking
    yes
    bevel gear
    without
    cable exit
    at the bottom
    motor voltage [VDC]
    24
    permissible operating force [kN]
    160 (for screws 10.9)
    fixing screw
    M20
    Accessories (8)
    Item no. CAD data Description
    Item no.
    209750046
    CAD data
    /
    Description
    Extension cable control cable and motor cable as a set both cables with plugs on both sides cable length: 5 m *as per catalogue sheet WZ 5.2670
    Item no.
    209750047
    CAD data
    /
    Description
    Extension cable control cable and motor cable as a set both cables with plugs on both sides cable length: 10 m *as per catalogue sheet WZ 5.2670
    Item no.
    209750048
    CAD data
    /
    Description
    Extension cable control cable and motor cable as a set both cables with plugs on both sides cable length: 15 m *as per catalogue sheet WZ 5.2670
    Item no.
    209750049
    CAD data
    /
    Description
    Extension cable control cable and motor cable as a set both cables with plugs on both sides cable length: 20 m *as per catalogue sheet WZ 5.2670
    Item no.
    3300285
    CAD data
    Description
    Drill bushing DIN 179 A 12 x 12 mm *as per data sheet B1.738
    Item no.
    3300287
    CAD data
    Description
    Drill bushing DIN 179 A 17 x 16 mm as per data sheet B1.738
    Item no.
    3300288
    CAD data
    Description
    Drill bushing DIN 179 A 21 x 20 mm as per data sheet B1.738
    Item no.
    3300289
    CAD data
    Description
    Drill bushing DIN 179 A 26 x 20 mm as per data sheet B1.738
    Application examples
    Application example 1

    Use of electromechanical wedge clamps:

    1. Sliding tables

    2. Injection moulding machines

    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.