• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    3.2204-1

    Sliding Clamps classic

    single acting, with spring return
    max. operating pressure 400 bar
    clamping force from 19 kN to 78 kN
    Sliding Clamps classic
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Information Series
    Description
    3.2204 Sliding clamps classic

    Manual positioning of the sliding clamp in the T-slots of the press ram or bed. Clamping on the die clamping edge by the application of hydraulic pressure to the piston and unclamping by spring force. The “classic” sliding clamp consists of a hydraulic clamping block which will be fixed with two screws to a T-slot adapter.
    The clamping block can also be directly screwed without T-slot adapter and can be ordered separately.

     

    Application

    The "classic" sliding clamp is a very sturdy hydraulic clamping element, used with low space requirements for clamping and locking on machines and plants, on press bed and ram. The use is possible at ambient temperatures up to a maximum of 120 °C.

     

    Advantages

    • Optimum force transmission
    • Clamping force from 19 kN up to 78 kN
    • Easy mounting
    • Suitable for large clamping edge tolerances
    • No colliding edges when inserting the dies
    • T-slot 18, 22, 28 and 36 mm are available
    • Total stroke 8 and 12 mm
    • Die standardisation with regard to the width and depth is not required
    • Easy to retrofit
    Video
    Products (7)
    type
    classic (7)
    type
    clamping block with T-slot adapter (7)
    stroke [mm]
    functioning
    single acting with spring return (7)
    max. operating pressure [bar]
    400 (7)
    hydraulic ports
    pipe thread G1/4 (7)
    max. clamping force [kN]
    for T-slot [mm]
    max. operating temperature [°C]
    120 (7)
    Item no. CAD datatypetypestroke [mm]functioning
    Item no.
    822021850
    CAD data
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    Properties
    Item no.
    822022250
    CAD data
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    Properties
    Item no.
    822032250
    CAD data
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    Properties
    Item no.
    822032850
    CAD data
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    Properties
    Item no.
    822042250
    CAD data
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    Properties
    Item no.
    822042850
    CAD data
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    Properties
    Item no.
    822052850
    CAD data
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    12
    functioning
    single acting with spring return
    Properties
    Item no.
    822021850
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    max. operating pressure [bar]
    400
    hydraulic ports
    pipe thread G1/4
    max. clamping force [kN]
    19.6
    for T-slot [mm]
    18
    max. operating temperature [°C]
    120
    Item no.
    822022250
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    max. operating pressure [bar]
    400
    hydraulic ports
    pipe thread G1/4
    max. clamping force [kN]
    19.6
    for T-slot [mm]
    22
    max. operating temperature [°C]
    120
    Item no.
    822032250
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    max. operating pressure [bar]
    400
    hydraulic ports
    pipe thread G1/4
    max. clamping force [kN]
    32
    for T-slot [mm]
    22
    max. operating temperature [°C]
    120
    Item no.
    822032850
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    max. operating pressure [bar]
    400
    hydraulic ports
    pipe thread G1/4
    max. clamping force [kN]
    32
    for T-slot [mm]
    28
    max. operating temperature [°C]
    120
    Item no.
    822042250
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    max. operating pressure [bar]
    400
    hydraulic ports
    pipe thread G1/4
    max. clamping force [kN]
    50
    for T-slot [mm]
    22
    max. operating temperature [°C]
    120
    Item no.
    822042850
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    8
    functioning
    single acting with spring return
    max. operating pressure [bar]
    400
    hydraulic ports
    pipe thread G1/4
    max. clamping force [kN]
    50
    for T-slot [mm]
    28
    max. operating temperature [°C]
    120
    Item no.
    822052850
    type
    classic
    type
    clamping block with T-slot adapter
    stroke [mm]
    12
    functioning
    single acting with spring return
    max. operating pressure [bar]
    400
    hydraulic ports
    pipe thread G1/4
    max. clamping force [kN]
    78
    for T-slot [mm]
    28
    max. operating temperature [°C]
    120
    Accessories (13)
    Item no. CAD data Description
    Item no.
    270010131
    CAD data
    /
    Description
    High-pressure hose ND4 / L=600 with wire braiding internal diameter: 4 mm length: 600 mm external diameter: 9,5 mm ports: at both sides with union nut M16 x 1.5 mm max. operating pressure: 500 bar *as per catalogue sheet WZ 11.3800
    Item no.
    270010133
    CAD data
    /
    Description
    High-pressure hose ND4 / L=800 with wire braiding internal diameter: 4 mm length: 800 mm external diameter: 9,5 mm ports: at both sides with union nut M16 x 1.5 mm max. operating pressure: 500 bar *as per catalogue sheet WZ 11.3800
    Item no.
    270010137
    CAD data
    /
    Description
    High-pressure hose ND4 / L=1200 with wire braiding internal diameter: 4 mm length: 1200 mm external diameter: 9,5 mm ports: at both sides with union nut M16 x 1.5 mm max. operating pressure: 500 bar *as per catalogue sheet WZ 11.3800
    Item no.
    270010141
    CAD data
    /
    Description
    High-pressure hose ND4 / L=1600 with wire braiding internal diameter: 4 mm length: 1600 mm external diameter: 9,5 mm ports: at both sides with union nut M16 x 1.5 mm max. operating pressure: 500 bar *as per catalogue sheet WZ 11.3800
    Item no.
    2754180
    CAD data
    Description
    Bracket to accommodate a sliding clamp without spacer bar for T-slot 18 mm *as per catalogue sheet WZ 3.2202
    Item no.
    2754220
    CAD data
    Description
    Bracket to accommodate a sliding clamp without spacer bar for T-slot 22 mm *as per catalogue sheet WZ 3.2202
    Item no.
    2754280
    CAD data
    Description
    Bracket to accommodate a sliding clamp without spacer bar for T-slot 28 mm *as per catalogue sheet WZ 3.2202
    Item no.
    2754500
    CAD data
    Description
    Spacer bar for bracket sliding clamp for T-slot 18, 22 or 28 mm specify distance dimension “x” when ordering *as per catalogue sheet WZ 3.2202
    Item no.
    550650003
    CAD data
    /
    Description
    Hose holder made from Delrin *as per data sheet WS12.3820
    Item no.
    827541850
    CAD data
    Description
    Parking station for sliding clamp with bracket and spacer bar for T-slot 18 mm *as per catalogue sheet WZ 3.2202
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.