Series

Sliding Clamps, Mechanical

with integral high-pressure spindle
clamping force 40 and 80 kN

Downloads

Catalogue sheet

US ES FR

Operating instructions

Available on demand.

Information Series

Description

6.2210 Sliding clamp, mechanical

Function

The sliding clamp is manually placed in the T-slots and screwed against the die clamping edge.
Once the high-pressure spindle has been adjusted to suit the height of the clamping edge, the clamping force is built up by turning the hexagon nut in clockwise direction.
The clamping force achieved depends on the set tightening torque of the torque wrench.

Installation note

Before applying the tightening torque, the high-pressure spindle must be screwed against the clamping edge so that there is no play.
If the parts are not rigid, tighten the high-pressure spindle using the hexagon nut until there is no play.

Clamping block with integral high-pressure spindle

Function

The sliding clamp is manually placed in the T-slots and screwed against the die clamping edge. The clamping force is built up by turning the hexagon nut in clockwise direction.
The clamping force achieved depends on the set tightening torque of the torque wrench.

Installation note

The clamping blocks with integral high-pressure spindle can be mounted on spacer bars.

Products (5)

Number

Item no.	CAD data	type	max clamping force [kN]	clamping force display	T-slot as per DIN 650
Item no. 2212111	CAD data	type sliding clamp	max clamping force [kN] 40	clamping force display without	T-slot as per DIN 650 18 or 22	Properties
Item no. 2212185	CAD data	type sliding clamp	max clamping force [kN] 40	clamping force display without	T-slot as per DIN 650 18	Properties
Item no. 2212225	CAD data	type sliding clamp	max clamping force [kN] 40	clamping force display without	T-slot as per DIN 650 22	Properties
Item no. 2213111	CAD data	type sliding clamp	max clamping force [kN] 80	clamping force display without	T-slot as per DIN 650 28	Properties
Item no. 2213285	CAD data	type sliding clamp	max clamping force [kN] 80	clamping force display without	T-slot as per DIN 650 28	Properties

Accessories (4)

Number

Item no.	CAD data	Description
Item no. 2754180	CAD data	Description Bracket to accommodate a sliding clamp without spacer bar for T-slot 18 mm *as per catalogue sheet WZ 3.2202
Item no. 2754220	CAD data	Description Bracket to accommodate a sliding clamp without spacer bar for T-slot 22 mm *as per catalogue sheet WZ 3.2202
Item no. 2754280	CAD data	Description Bracket to accommodate a sliding clamp without spacer bar for T-slot 28 mm *as per catalogue sheet WZ 3.2202
Item no. 2754500	CAD data	Description Spacer bar for bracket sliding clamp for T-slot 18, 22 or 28 mm specify distance dimension “x” when ordering *as per catalogue sheet WZ 3.2202

Application examples

Application example 1

Use of mechanical sliding clamps 6.2210 on a machine table.